Setting Do Not Disturb
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
Activating Do Not Disturb
Using the dnd softkey:
To activate Do Not Disturb, press the dnd softkey. The LCD screen indicates that
Do Not Disturb is turned on for your phone.
Using the Setup button:
You can also access Do Not Disturb by performing the following steps:
STEP 1 Press the Setup button.
STEP 2 Scroll to Preferences and press the select softkey.
STEP 3 Scroll to Do Not Disturb and press the edit softkey.
STEP 4 Press the y/n softkey to choose y, then press the ok softkey.
Using Basic Phone Functions
Turning Call Waiting On and Off
Cisco Small Business IP Phone SPA 30X User Guide (SIP) 483
STEP 5 Press the save softkey.
Using the star code:
Enter *78 to activate Do Not Disturb.
Deactivating Do Not Disturb
Using the -dnd softkey:
To deactivate Do Not Disturb, press the -dnd softkey.
Using the Setup button:
You can also deactivate Do Not Disturb by doing the following:
STEP 1 Press the Setup button.
STEP 2 Scroll to Preferences and press the select softkey.
STEP 3 Scroll to Do Not Disturb and press the edit softkey.
STEP 4 Press the y/n softkey to change to yes.
STEP 5 Press the ok softkey.
STEP 6 Press the save softkey.
Using the star code:
Enter *79 to deactivate Do Not Disturb.